Make an Environmental Coque Environment Food at work displacement lifestyle

Make an Environmental Coque Environment Food at work displacement lifestyle

Coats for phones are essential accessories to protect them from shocks, scratches and falls.This is why equipping your smartphone is important.However, the hulls are expensive and you may not find a model that suits you.In this case, why not make your cell phone shell yourself?

A hot -glue cell phone case

The hot glue allows you to make many accessories.The smartphone shell is one of them.Easy to use and even color, it will protect your phone to measure and quite efficiently.

On the other hand, as much to be completely honest with you, to obtain a very smooth shell with the hot glue is impossible.You can nevertheless make a nice mandala, arabesques, grids, etc..

Two methods are applicable: handmade production or the one using a guide or boss.

What you need

The realization

If you use a pattern, cut it and place it on the back of your smartphone.If this is not the case, you can already go to the next step.

Turn off your mobile so that it does not overheat during the operation.Cover your phone using transparent movie or baking paper.This will be used to protect it directly from glue.

Materialize with a felt, the places to remain accessible: the lens of the camera, the jack and loading locations, the SIM card insertion drawers and SD card, etc..

Connect your glue gun and once it is ready to be used, iron the patterns of the boss or draw the patterns you want by leaving free rein to your imagination.

Do not forget to make patterns on the sides and a edge on the front so that the glue perfectly envelops your phone.

When the shell is dry, you just have to remove it from the phone.So you can rid your mobile parchment paper or plastic movie.

Return the phone in and check that all the useful parts are clear.If this is not the case, take the openings using a cutter.

Now is the time to paint your shell using varnish, paint or painting bombs.

A silicone smartphone shell

Fabriquer une coque de téléphone Environnement Alimentation Au travail déplacement Style de vie

Silicone allows you to create a smoother and more aesthetic shell.It is in DIY stores in a kind of syringe gun.However, it is more difficult to handle and should be used rather outdoors, because silicone gives off a fairly strong odor.

What you need

The realization

Start by preparing your silicone paste by mixing about 50 g of cornstarch and 35 g of silicone.At this point, you can put the coloring or paint to tint your shell.

Put on your gloves and knead the ingredients directly with your hands, for at least 5 minutes.You will get a ball of dough.A little starch may remain in the container, but it does not matter.If your mixture is crumbly, continue to knead it until it becomes more homogeneous.

Spread the dough using the roller, so that it is longer and wide than the phone itself.As for the thickness, it must not exceed 3 mm to remain aesthetic.

Pack your phone in parchment paper and place it on the silicone, screen to you.

Fold the dough to the edges of the phone, so that all sides are well covered.Read the edges well using your fingers to avoid air bubbles or possible folds.The more you apply yourself and the more your shell will be perfect.

You can cut patterns on the back of the shell thanks to specific tools.You can also cut patterns of letters or patterns in cardboard, place them on it and apply color to the bomb or glitter, etc..Almost everything is achievable!

You must now wait at least 8 hours, maybe more or less depending on the type of silicone you have used.It is dry when it leaves no imprint by placing your finger on it.

Remove the shell and pass a brush or brush stroke to remove any traces of cornstarch.

Now is the time to tuning the shell's finishes by removing surplus or faults using a cutter.Likewise, make spaces for useful parts (camera, space spaces, etc..)).

Using the sandpaper, smooth the surface of the shell.You can iron a transparent silicone layer over it and smooth it with a spatula if necessary.

You can also bring a little color with nail polish, paint, etc..It is also possible to create shapes or letters in silicone, then stick to the back of the shell to personalize it.

A felt phone case

There are several methods to manage to create a felt shell.On the video below, you can see a fairly advanced method.

If you want to be easier, here is how to do it.

What you need

The realization

Place your smartphone or mobile phone on a felt leaf.This must be placed in the center, so that the fabric exceeds at least 1 cm at the top and bottom, but also on the right and on the left.

Materialize the benchmarks using a felt and draw the straight lines using a rule.Cut the two pieces of felt to obtain two large identical rectangles.

Using the pins, keep the two rectangles on board, but leave one of the smallest sides free.It will be used to enter and release the phone.

Sew the edges, taking care to keep the phone in its case.This will give you an additional benchmark.However, if this is not practical for you, you can withdraw it.

Using the chisel, finish cutting the remaining edges and rounding the angles.

How to customize your smartphone case?

You can customize your DIY shell or a neutral bought commercially.To personalize it, you can use relief paint, glitter, stickers, rhinestones and even fabric.

En effet, il est possible de découper du tissu (dentelle par ex ou tout autre tissu de votre choix)), puis de l’appliquer à l’intérieur de la coque transparente.Glue it with transparent and shiny glue for optimal rendering.

Decorative tapes are also excellent means to customize a phone case.Cut, glue, make patterns, alternate models, etc..If you have scrapbooking paper, it can also be used.

Are there other methods for making a phone case?

If you are comfortable with the drawing, you can also create your own phone case.The shell can be larger than the phone itself.Many use this method to manufacture Kawaï shells for example.

If on the contrary, you are not at all comfortable with the pencil, you can take a transparent and united shell in the.You can then draw the desired patterns whether they are made by hand or directly offended on a model that you like.You can also stick pearls or rhinestones to make a real jewelry.

La technique du dot painting (ou pointillisme)) est aussi une excellente méthode pour réaliser une coque unique, minimaliste et très tendance.

If the hook has no secrets for you, you can knit a little "sock" on your phone.Of course, this will only protect it very slightly from shocks and falls, but this solution will make it an ideal accessory to avoid scratches.A link will lock the phone in its DIY cover.

Tags: