Selection of iPhone XS and XS Max checkers |igeneration

Accessories

64 commentaires Stéphane Moussie |

To protect your iPhone XS or XS Max at more than € 1,000, would you put a shell?Here is a selection of models, all compatible with wireless charging, from various manufacturers.

Note that iPhone X shells are compatible with the iPhone XS.The camera of the iPhone XS is very slightly larger than that of the iPhone X, but that was not a problem with all the shells we tested.

Apple

Apple always offers the same shells for its new iPhone: silicone shell (€ 45), leather shell (€ 55) and leather folio case (€ 119 for the XS and € 149 for the XS Max).Only novelty, unpublished colors in the tone of the fall.

We do not recommend the silicone shell: despite its high price, it is damaged relatively quickly (the coating film ends up getting rid of it).New colors: nectarine, midnight blue, lavender gray and horizon blue.

We appreciate the leather shell which has very practical aluminum buttons.The new colors are midnight blue, forest green, peony pink and cape blue code.

The folio case is very neat and allows you to store a few cards, but its price can cool.

Moshi

Moshi has a wide range of iPhone XS shells, with quite different models.All must protect against falls up to 1.22 m from all angles - we did not dare to test this point.Moshi products are distributed from the main resellers, but new products are only available on the manufacturer's website for the moment.

The Capto shell, which is in plastic, stands out for the presence of a small integrated strap which has two functions.After detached it, you can slide your finger in it to hold your iPhone whatever happens.It is more discreet and just as effective than the rings that stick to the back of smartphones.

The strap can also serve as a crutch.It doesn't necessarily look like it, but the iPhone is well in a landscape with this mechanism, and you can even slightly adjust the inclination.If you are missing from any of these functions on your usual shell, CAPTO should satisfy you.

Colors: Black and RoseiPhone: XR, XS and XS Maxprix: € 29.95 (+ € 5 for XS Max)

The vesta is a rigid shell that attracts attention due to its back in gray fabric with small color lines.It is rather original and well done, even if we wonder if the features will age well.

The Vesta is also compatible with the Snapto system of Moshi, which allows it to be magnetized on a base sold separately.

Colors: gray, pink and vertone: XR and XS Maxprix: € 39.95 (+ € 5 for XS Max)

Stealthcover is a folio case whose flap is transparent.You can see your notifications appear on the screen without having to open it.The flap is held by a magnet.

Colors: Gray and RoseiPhone: XR, XS, XS Maxprix: € 39.95 (+ € 5 for XS Max)

The Vitros shell is the most classic in the lot.It is made of flexible plastic and its back is transparent to reveal the finish of the iPhone.Its around you is either transparent or in a metallic color.

Nothing to say about the manufacturing, except that there are not two buttons for the volume, but only one longer, which I find less practical than two.

Colors: Transparent, Black, Silver and Oripation: XR, XS and XS Maxprix: € 24.95 (+ € 5 for XS Max)

Rhinoshield

Rhinoshield offers very protective cases and for some largely customizable.Like Moshi, Rhinoshield products are distributed among the main resellers, such as Amazon, but the news is only marketed on the manufacturer's site for the moment.

Solidsuit, which is made of hard plastic (polyurethane), provides protection against falls of at least 3.5 meters.We did not want to risk damaging an iPhone XS, but the shell inspires confidence.The iPhone is difficult to remove once in place.

To have a touch of originality, you can select a rear leather side, carbon fiber, wood or microfiber.

Price: from € 29.99 iPhone: xs and xs maxcouleurs: black, gray, white and powder pink

The MOD NX is a modular shell, which can protect either the metal chassis of the iPhone only ("Bumper" mode), or its chassis and its back ("verso" mode).

The box includes a bumper, a border necessary for use in Bumper mode, a plastic window and three buttons.You can choose the color of the different elements when ordering and intervene later with a second mod NX.

Price: from € 29.99 iPhone: XR, XS and XS max

The CrashGuard NX is similar to the MOD NX, without the window at the back.This is a bumper only.Its pimples and its border are interchangeable.

Price: from € 24.99

Others

If you like leather shells, we recommend Nomad and Mujjo products that are of good quality without being too expensive.

The Mujjo Full Wallet allows you to store one or two cards on the back of the iPhone.It is necessary by countering avoiding using wireless recharge in this case.

Price: 49 €

The Clear Case a transparent plastic shell with a leather insert.Nomad has other models where leather is more present.

Price: around 40 €

In the other recommendable brands, we can cite Otterbox, which makes solid hulls, noreve, for all that is leather, and incipio, which brings together originality and quality.

Pour aller plus loin :

---

Tags#iPhone XS#iPhone XS Max#étuis#coques

First beta of iOS 15.4, lots of new products in sight!🆕

The headphones are well disappearing from iPhone boxes

TVOS 15.4: The "following" content is embedded, the more readable AirPods settings, and other new features

Promo: the iPhone 12 of 64 GB at € 613, its best price

xavier25 |

Transparent Spigen shell as usual at less than € 10.Do the job without distorting the Tel.

Cric |

@Xavier25

I was amazed not to see Spigen in the list that I use on my 5S and which once saved the bet saved.

JMas |

When you want to protect your iPhone XS Max and that in addition or want to give it a little personal touch, it is not won with the hulls cited above anyway.Just an example of what can be online: https://www.pixxpia.com/coque-iPhone-xs--max/disneyca changes everything anyway lol ... and its always protects.

Winitri |

I see that the Incipio Feather has not been cited.The top of the top.

eric78 |

@Winitri

+1

Stéphane Moussie |@Winitri : ah oui, j'ai oublié Incipio, c'est vrai qu'elles sont bien. J'ajoute un mot.reborn |

Celle ci —> https://travelteq.com/collections/iphone-cases

TrollMan06 |

@reborn

Filth.??

reborn |

I like the back card?

Thizzface69 |

@Trollman06

I admit they are shit

DamienLT |

@reborn

To have the Messenger Bag is a great brand!

gattuz |

Naked for me with Séna transport clutch.

arnaaud57 |

I ordered two Thin made an Elago and an Easy ACC on Amazon € 9 each we will see what it gives.Otherwise it will be a total

Malvik2 |

Isn't it the folio door that is a real shit?I seem to have read deplorable tests on it

chriseg |

Apple leather shells worries me. I find them slippery

Splinter |

@chriseg

Above all, they darken very quickly!Weird, moreover, that the article does not remind you.We are with a case that is not very steep after just a few days.

sad me |

@Splinter

I use that official Apple leather cases and there are not better in quality, finish and protection. Estate it is better to take care of it but the black you are talking about is the patina that embellishes the case?

Goundy |

@Sad me

Apple, quality case ...? At the price of an Apple case you can hit a dozen of all colors on aliexpress, change depending on your mood and on all the lifespan you triple that of Apple.A high price of an item never approves its quality.

abioninho |

@Sad me

The patina beautifies the leather. Apple shells are not in real leather.On the contrary, they blacken.

Thizzface69 |

For me the top of the top is the Caudabe brand:

This one:

https://www.caudabe.com/products/the-sheath-iPhone-x

Nice design, sober, fine and protective with a little price there is no better!

pereanathan |

The access case III from Nodus for me at 40 €

Xav852 |

Protect your iPhone with a hard plastic shell ...?

I recommend the Torro leather shell, really of good quality!

armandgz123 |

@Xav852

Often it's just against scratches

SebKyz |

@Armandgz123

A film ahead and behind in this case.

iDidier |

There is also Noreve which makes excellent products and excellent qualities.

RolandDT |

@ididier

I confirm .. Top at all levels? After you have to like this kind of case, a bulky hair (and a bit expensive), but hey, it is the price to pay for good quality protection and that does its goodjob..

altifab2 |

I took Apple Care + protection and nothing else ;-) it's a bit expensive but it allows you to fully enjoy the design of the device.

Splinter |

@Altifab2

Yes finally to change your iPhone is still 90 €!

sad me |

@Altifab2

And in the event of an accident he sends you 1 pretty iPhone reconditioned ???

Kydix |

For my part it is the Roshield MOD NX.No complaints, possibility of adding the photo objectives afterwards, we feel that the phone is safe in it.

Only downside who can interfere with more than one, she is quite thick, I don't mind on the contrary, I don't like the too fine iPhone

Quaternine |

https://bellroy.com/products/phone-case/xsmax/coral#image-3 The shells of the Bellroy brand have this little thing?

armandgz123 |

Personally I always take a shell on ultra -fine aliexpress which does not distort the phone, with a material which automatically repairs the shocks and scratches of the shell ... and which costs only € 1.50

flafarge |

And nothing on the Spigen shells ??

flafarge |

The Liquid Air is very good

SIMOMAX1512 |

Lack a bit of photos and front photos on certain shells to get an idea of the rendering

SebKyz |

For me it is a tempered spigen glass in front and a film against the scratches for the back. Done bad at the beginning with the tempered glass because it adds micro stops to the iPhone and the sensation of sliding is not the same. Horror of all kinds of shell.Touching the iPhone in glass does not deserve that, whatever its price.

battboss |

Mujjo makes beautiful shell and pocket but the leather can badly skate according to our use.

Phenix80 |

The problem is the lag on the camera between the X and XS: suddenly all the shells stamped X are not opposite on the lens at best, and at worst eat on the camera when they areNormally to the millimeter for the X. We have to wait for the manufacturers to adjust their cutting, unfortunately most mention the double compatibility. The Apple shells have been adjusted, the old ones for the X have all been returned to the warehouse for the benefit of theNew cutting for the XS

artik |

The best ultra -fine or not shells, it's Caudabe without hesitation, the adjustment is simply perfect

https://www.caudabe.com

EricdeB |

Transparent shell with reinforcements on well -done and discreet angles.€ 7 on Amazon.Plus a tempered glass window (sold by two) € 5.And hop !

itwxsme |

After having leafed through the shells on Amazon a little for my XS, I wonder if the X hulls are compatible, because I see no shell especially for the XS but that "for iPhone XS/X" someone to enlighten me?(PS: I saw that the photo module is a bit larger between X and XS)

artik |

@itwxsme

Small shift in the APN

itwxsme |

@artik

So all X/XS written shells are not compatible

suuf |

The Rhinoshield shells are m*rde! My iPhone has microphones on the back because of the mod ....

loupien |

And what about the glasses soaked on the iPhone?Are you for or against ?Having acquired the iPhone XS Max, I hesitate because so far I have never put it, believing that it distorts the iPhone ... But given the budget, I am in an endless reflection? And you?

duke90000 |

@loupien

Not against opinions on soaked glass too!

Goundy |

@loupien

It is earlier the shells that distort the phone not the protective window. Some be the phone I always put it automatically.Because the microphones happens very quickly, with off screen it is very ugly and all over it should slide less well.Buy in one of good quality, bent and silicon in the contours to properly marry the shape of the phone.(Look at Baseus Official Store on Aliexpress, they have in one a 8 euro it's a killings)

gbasile |

I had bought an Otterbox Traction shell that I find pretty and which seems to protect the phone well on the other hand, one of my 2 contactless chargers did not work with, the vertical belkin sold at Apple.

Pages

User connection